Resin buttons are the preferred button type for Polo shirts, shirts, and overcoats. Its material is environmentally friendly and non-toxic, and its quality is reliable and stable.


Most resin buttons are white or black. However, some customers' requirements for the color of buttons are not limited to black or white. Because their trademark color is special, the color of the button and the trademark are required to be the same Pantone color.
Here is a typical customer case from Igingle. 
First of all, we received an email from the customer, who stated that he would not buy fade color resin buttons and provided his own color number.
Our business people are very puzzled that resin buttons will never fade, why customers have this requirement. After much communication, we learned that the customer had purchased a resin button and it really faded.
Through communication, we convinced our customers to send us samples. Then make sure our products don't fade! Because Igingle did button engraving, I did not receive such a complaint again.
We found out after we received the samples. It turned out that the color of the surface of his custom-made resin buttons was painted with paint. After repeated washing and friction with clothing, the color of the buttons gradually faded.

Igingle's button colors are in accordance with customer requirements. Starting from the raw materials, color modulation is performed. It also undergoes a high temperature of 80 ° C to carry out chemical reactions in water to stabilize the shape and color of the buttons. So our color is 100% guaranteed not to fade.
We can customize any color, as long as you can provide us with Pantone color number, the entire resin button can be made!

Not only button color itself will be choosen, some customers also pay attention to the color of the trademark.

The vast majority of customers are only engraving trademarks. The color of this type of trademark is exactly the same as the color of the button.
There are also some customers who require to fill in the color after engraving the trademark. In this way, the trademark is more obvious on the button, and the same is recognized. Because the color fill is applied in the later period, it will not be as strong as imagined. If we don't use sophisticated tools, such as needles, knives to destroy it. In daily washing, the color will not fall. Our button sales have a history of 5 years, and so far no customers have complained about this problem.

The following the pictures of our resin button orders:

If you have any other questions, please contact us as soon as possible!